Highlights:
1.Class 1 protective enclosure for labor health.
2.Desktop design, put on top of desk, small footprint, good looking.
3.Embedded computer configurable.
4.Small size, 73*43*70cm in dimension, freight saving, good for door to door express.
5.Configured with China top laser source, Newport laser source configurable as per request.
Features:
3.Maintenance free, forced air cooling laser source and quality laser parts relieve maintenance.
4.Up to 20,000 hours expected laser lifetime, low cost of ownership per hourly.
5.Up to 15,000mm/s scanning speed, good for high speed laser writing requirement scenario.
6.Easy-to-use software,fast automatic date/time,serial number and data-matrix laser coding,support mainstream vector image and bitmap image format laser printing.
Laser Marking Samples:
|
![]() |
![]() |
|
![]() |
![]() |
Green Laser Maring Machine Applications:
Green laser at 532nm is half cold laser, less heating introduced to work pieces when marking, the laser is especially good for organics, glasses and plastic laser marking.
For PC, FPC, FPR, GFPR, FPD, ABS, HIPS, PE (HDPE, LDPE, UHMWPE), PP, and color plastics, e.g., PPR, PVC, PET, laser beam lead to a thermochemical process, plastics frothing or color changing, a high-contrast mark with no measurable surface disruption and shallow penetration into the material created in this manner. Those materials is widely used in food and beverage packaging sector, Maiman offers industry floor type mark on-the-fly green lasers to fulfill this requirement.
Fresh food, e.g., eggs, fruit and vegetables traceability is now a mandatory in many countries, instead of inkjet printing, a high powered green laser is a safer, more environment friendly and less costly solution, green laser gives a high contrast, no chemical additive marking effect without damaging the food.
Compare with Co2 laser glass and ceramics engraving and marking, green laser offers a better engraving and marking effect, green laser half cold laser beam introduces much smaller fractional than Co2 laser do when heating up glasses.
Work Pattern: |
Q-Switched |
Output Power: |
1.5W, 3W, 6W, 12W |
Wavelength: |
532nm |
Pulse Frequency: |
20KHz |
Working Window: |
110mm*110mm by default |
Min. Character Size: |
0.01mm |
Max. Marking Depth: |
0.01~0.50mm, depends on the marking material |
Min. Marking Width: |
0.01mm |
Max. Marking Speed: |
7,000mm/s |
Beam Quality |
M2<1.3 |
Positioning Accuracy: |
+/-0.02mm |
Expected MTBF: |
20,000 hours |
Cooling: |
Air Cooled |
Working Temperature: |
0°C~40°C (32°F~104°F) |
Power Consumption: |
<=500W |
PPR | PET | HIPS | Brass | Steel | Nickel plated Kovar |
PVC | PBT | GFPR | Copper | Aluminum | Cobalt chrome steel |
PC | ABS | PEEK | Gold | Sapphire | Anodized aluminum |
PP | FPC | Wafer | Ceramic | Mild steel | Brushed aluminum |
PE | FPR | Nylon | Silicon | Carbon fiber | Colored delrin |
FPD |
Laser Controller |
Support XY2-100 protocol, digital signals output for galvo scanning head.
|
Software: |
Support common vector image and bit format image.
|
Galvo Head: |
High speed up to 12,000mm/s.
|
f-Theta Lens: |
Less than 1% distortion produces precise spot on image plane.
|
Rectifiers: |
Compatible with 110V/220V civil power. Stable, low faulty rate. |